JOHNTHOMAS
Super Member
- Joined
- Apr 14, 2008
- Messages
- 7,724
- Location
- Somerset, Ky
- Tractor
- F2690 4WD RTV X1140 MX5400 HST ZD1211
Yep, like a sleigh runner.
ZD1511 72" REAR DISCHARGE INFO & BLADE OVERLAP
- Thread starter Brown Dog
- Start date
Yep, like a sleigh runner.
rustyshakelford
Veteran Member
Yes. Yesterday I think. Needing to go pick up a trailer on Monday and then try to find some time to get it. They have it ready and parked inside a covered barn to keep it out of the sun. I think it still needs the canopy installed. It's going to be nice having a smaller trailer again
Brett
JOHNTHOMAS
Super Member
- Joined
- Apr 14, 2008
- Messages
- 7,724
- Location
- Somerset, Ky
- Tractor
- F2690 4WD RTV X1140 MX5400 HST ZD1211
The 1" round looped rods on each side of deck
:thumbsup: Yep.
OP
Brown Dog
Veteran Member
- Joined
- Jun 5, 2014
- Messages
- 1,173
- Location
- North GA
- Tractor
- John Deere 5115M 5101E H260 5115M 540M all MFD
Completely Satisfied Customer
The 60" RD BTS is much slower at 16k.
The 72" RD BTS Is 18k rpm & really cuts a lot finer cut.
I am truly Amazed with my ZD1211 72" RD
Rear Discharge Decks exhaust THICK TALL Grass Clippings so much faster than a SD Deck slowing you down for clippings to be processed into thick clumpy windrows.
The 60" RD BTS is much slower at 16k.
The 72" RD BTS Is 18k rpm & really cuts a lot finer cut.
I am truly Amazed with my ZD1211 72" RD
Rear Discharge Decks exhaust THICK TALL Grass Clippings so much faster than a SD Deck slowing you down for clippings to be processed into thick clumpy windrows.
OP
Brown Dog
Veteran Member
- Joined
- Jun 5, 2014
- Messages
- 1,173
- Location
- North GA
- Tractor
- John Deere 5115M 5101E H260 5115M 540M all MFD
72" Rear Discharge Blades 2.5" wide with 1-1/8" center hole :
K5698-97530 is OEM replacement box of 3
K5698-34340 is a single blade OEM
70000-25013 is a single blade "High Lift" & EXACTLY the SAME Blade as the OEM stock replacements.
Kubota must be changing part #'s
K5975-34460 is the curved looking mulching blade.
The new style side discharge blades are 3" wide, flatter cutting edge with a bigger center hole than the RD uses.
Just a little FYI for you Tech Guys
.
K5698-97530 is OEM replacement box of 3
K5698-34340 is a single blade OEM
70000-25013 is a single blade "High Lift" & EXACTLY the SAME Blade as the OEM stock replacements.
Kubota must be changing part #'s
K5975-34460 is the curved looking mulching blade.
The new style side discharge blades are 3" wide, flatter cutting edge with a bigger center hole than the RD uses.
Just a little FYI for you Tech Guys
.