Results 1 to 4 of 4
  1. #1
    New Member
    Join Date
    Jul 2006
    Posts
    16

    Default g5200 mower deck

    have a g5200 with the 48 inch deck. does anybody know of a good place(cheap) to get a new deck or a good used one? i think my deck has shot craps. the holes in the deck are to large now and the grass packs in so bad its not even funny! i think it also might be some of my overheating problems!!

    thanks for all the help

  2. #2
    Veteran Member
    Join Date
    Sep 2004
    Posts
    2,375
    Location
    Kansas, Butler county, Just east of DooDah
    Tractor
    Kubota L4200 GSTCA

    Default Re: g5200 mower deck

    eBay ??

  3. #3
    New Member
    Join Date
    Dec 2012
    Posts
    17
    Location
    Bullard, Texas
    Tractor
    2007 kioti ck25, Cub Cadet 3204, Kubota G5200HST

    Default Re: g5200 mower deck

    I rebuilt my 48" deck when I inherited the mower with my house. Took it all apart-- take pics to remember how to put it back together. Had a piece of 10 ga steel cut to fit top of deck. Welded it in place used existing holes in remainder to drill or cut out for spindles and idler. Had to fabricate a new spring holder. Rebuilt all spindles and gear box. New anti scalp roller and bracket. Added 1/2" bar to groove all around front of deck where it was getting thin. New coat of paint and a new belt. Had to seal some gaps and crevices with Labmetal filler. Deck still cuts like a new one. You might want to try taking it to a local welding shop to see what it would cost to rebuild top and repair what could be. A couple hundred here might save you several later.

  4. #4
    Veteran Member CliffordK's Avatar
    Join Date
    Mar 2013
    Posts
    1,202
    Location
    Eugene, Oregon
    Tractor
    Toro D200, Ford 1715, International 884,

    Default Re: g5200 mower deck

    I think my G4200 and G5200 tractors are a bit undersized, at least for mowing tall grass.

    You didn't mention where you are located. One occasionally sees mower decks on Craigslist too.

    I had intended to try to adapt an older Bolens mower deck to my kubota, until I found a second tractor that I took the deck off of. You have all the mounts, so it should be easy enough to figure out how to move your mounts to the Bolens deck, or fabricate new ones.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.