B7100 3 point hitch arms

[amitysanimal]

I need a set of lower arms for my tractor, Kubota wants $800.00 for the complete assembly. Thats just ridiculous and I refuse to pay that. I can make a set using the weld on ball and sockets, but was wondering if anyone had a better solution or may know where I could get a set. Also, are all your lower arms straight or offset. The local dealer has one with a set of arms that are offset about 4 inches, but most of the ones I have seen online are straight.

Any suggestions?

Cleve

 

[KennyV]

Try Ebay Item number: 300133569408 … Looks like it should work. KennyV.

 

[ozzie tractor]

every 7100 i have seen has an offset as you describe. go the weld on option, its cheap and works well. just measure up a set on a 7100 and copy them.

 

[Thomas]

Morn Cleve.
$800.oo yikes...I would fire up the ole hot glue stick first.

I have CRS lately but it wasn't to long ago gentlman also looking for hitch arms for his B7100 here...maybe SEARCH will help.

I've only seen off sets on the B7100

 

[Erik Graham]

Cleve;

I happen the have my operator's manual at work today and the photo of the rear of the tractor clearly shows them to be offset. Most of the smaller tractors I've seen are of this type. I think it's related to the resulting geometry of them being close together at the PTO end.

Cheers, Erik

 

[amitysanimal]

Item number 230155829483 on Ebay looks like it will work, and only $125.00. Thanks for all your help guys!!!!
Cleve