LA 1001/LA 1002 loaders

   / LA 1001/LA 1002 loaders #1  

design

Silver Member
Joined
Oct 4, 2005
Messages
176
Location
Southern, NH
Tractor
M5400
There is a 2nd set of 1/2"x2"x24" steel brackets attached to the frame. The 1st set is used to keep the loader upright when it is not installed on the machine. What is the 2nd set used for?

One end has a 1/2" diameter pin and the other end has a slot.

-Design
 
   / LA 1001/LA 1002 loaders #2  
Some loaders have just a single pair of support arms - other models use two arms on each side. On my LA1150 the pieces with the slot and pin are part of the support when the loader is removed. The slots fit over pins welded to the loader frame.
mx5000loaderattach.jpg

Pic above is doctored to show approx arm locations.
 
Last edited:
 
Top