Snow L3130 w/ L2172 snow plow

[SteveA]

Anyone using this setup? Can't seem to find much info on the factory front plow blade kit.
From what I was able to find, the plow subframe has to be removed in order to re-attach the loader. (mine is the 723).
Is it worth the aggravation? I'm trying to stay away from one of those loader arm rigs or jury rigging a plow blade to my bucket.

[art]

Steve, yes the linkage has to come off. It is two pins and you should have it down on the ground to back off after unhooking your hoses.

[SteveA]

Is there anything else that is needed in addition to the plow and the subframe? Are the existing hydraulics and controls off the 723 loader sufficient? Thanks.

[art]

I don't know which valve that you have but you should be fine. You could drop the whole frame and blade at once.. At that it is about a five minute change.

[SteveA]

Any clue what the price range is for the Kubota plow and subframe assembly? Also, are there any after-market plow setups that will mount similar to the Kubota line? Thanks.