Hydraulic Toplink for B7800..can it be done?

[Sniggle]

I am intrigue by the idea of a hydraulic top link. I know I would have to get the hydraulics to the rear of the tractor and I would use the CCM hydraulic toplink....but I have no idea how to do it or if it is even feasible.

Has anyone with a B7800 (with FEL) installed a rear hydraulic block? What parts are needed and how did you do it?

Thanks in advance

-----------------------------------------------
2003 Kubota B7800, Woods BB, LR, RB, PHD, 60 MMM, Filled tires, FEL

1980's Kubota G1900 4S

 

[Sniggle]

Let me ask another related question...I was staring at the hydraulic block and there are the 4 ports on top that are used for the loader. Then there appeared to be 2 ports on the front facing side that have what look like large long (2 inches) plugs that are labelled 'yw244'.

Are these relif valves? Or are they additional ports?

Thanks for your help.

---------------------------------------
2003 Kubota B7800, Woods BB, LR, RB, PHD, 60 MMM, Filled tires, FEL

1980's Kubota G1900 4S

 

[ChuckinNH]

I don't know much about hydraulics, but I know it's been done. Here is one set up.

 

[btolle]

I have a B7510 and installed the CCM TopNTilt. Pics at http://www.tractorbynet.com/photos/showgallery.php/cat/500/ppuser/15812

The Top link is definitely the most used portion. Unless you are going to be using a blade where you need to tilt it you won't get much use out of the tilt cylinder.

BTW, CCM are great folks to deal with.