Problem with toplink fit on B2620

seapea · 03-18-2008, 01:38 PM

The toplink that came with my B2620 is rather short (about 17" when not extended). I bought a medium sized replacedment at TSC which is 21". However, it won't attach to the tractor. The space between the toplink mounting holes on the tractor is too narrow. The toplink that came with my B2620 is about 1 5/8" wide at the mounting point, and it just barely fits. The new toplink is about 1 3/4" wide, and is about 1/16" wider than the opening. How do I make it fit, or is there a different sized toplink I can use?

BTW, I also bought an extra long 25" toplink from a New Holland dealer (it's a lot closer than the Kubtota dealer), and it has the same problem.

thanks,

Chris

ChuckinNH · 03-18-2008, 01:54 PM

I can't really tell from the photos that I have, but it looks like the top link mount on the tractor might be two separate pieces. If it is, you probalby could loosen all four bolts, and spread the two pieces a bit further apart.

seapea · 03-18-2008, 02:06 PM

It is two pieces with 2 bolts holding each piece. Anyone know if they spread before I take a stab at it.

Chris

MessickFarmEqu · 03-18-2008, 02:37 PM

This is a common problem with aftermarket links. Just take a bench grinder to it.

RobJ · 03-18-2008, 02:45 PM

Quote:

Originally Posted by MessickFarmEqu

This is a common problem with aftermarket links. Just take a bench grinder to it.

1/16"...just rub it on the concrete a little bit.

03-18-2008, 01:38 PM	#1 (permalink)
seapea Silver Member Join Date: Apr 2005 Location: SF Bay Posts: 243	Problem with toplink fit on B2620 The toplink that came with my B2620 is rather short (about 17" when not extended). I bought a medium sized replacedment at TSC which is 21". However, it won't attach to the tractor. The space between the toplink mounting holes on the tractor is too narrow. The toplink that came with my B2620 is about 1 5/8" wide at the mounting point, and it just barely fits. The new toplink is about 1 3/4" wide, and is about 1/16" wider than the opening. How do I make it fit, or is there a different sized toplink I can use? BTW, I also bought an extra long 25" toplink from a New Holland dealer (it's a lot closer than the Kubtota dealer), and it has the same problem. thanks, Chris

03-18-2008, 01:54 PM	#2 (permalink)
ChuckinNH Veteran Member Join Date: Jun 2003 Location: NH Posts: 1,365	Re: Problem with toplink fit on B2620 I can't really tell from the photos that I have, but it looks like the top link mount on the tractor might be two separate pieces. If it is, you probalby could loosen all four bolts, and spread the two pieces a bit further apart. __________________ B2620,Loaded R-4's , Wallenstein BX42 chipper, Bush Hog SQ148 RC, 4' x 8' chain harrow, and more to come...

03-18-2008, 02:06 PM	#3 (permalink)
seapea Silver Member Join Date: Apr 2005 Location: SF Bay Posts: 243	Re: Problem with toplink fit on B2620 It is two pieces with 2 bolts holding each piece. Anyone know if they spread before I take a stab at it. Chris

03-18-2008, 02:37 PM	#4 (permalink)
MessickFarmEqu Elite Member Join Date: Feb 2004 Location: Lancaster County, PA Posts: 2,696	Re: Problem with toplink fit on B2620 This is a common problem with aftermarket links. Just take a bench grinder to it.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode