under the tractor

Bobcar · 05-18-2008, 04:25 PM

Not long ago I a mech. was doing my 50 hr. service on my BX 24 and before I reattached the 60 mmm I did a once over and found 3 nuts missing. Did not even look like they were ever there. So everyone I suggest you give a peak.

pdowling1 · 05-18-2008, 07:38 PM

If you are referring to the studs holding the top covers in place, they don't get nuts, they are used as pins to hold the cover, nuts would make life difficult.

05-18-2008, 04:25 PM	#1 (permalink)
Bobcar New Member Join Date: Aug 2006 Location: stormville,N.Y. Posts: 15	under the tractor Not long ago I a mech. was doing my 50 hr. service on my BX 24 and before I reattached the 60 mmm I did a once over and found 3 nuts missing. Did not even look like they were ever there. So everyone I suggest you give a peak.

05-18-2008, 07:38 PM	#2 (permalink)
pdowling1 Member Join Date: Jul 2006 Location: Falling Waters,WV Posts: 45	Re: under the tractor If you are referring to the studs holding the top covers in place, they don't get nuts, they are used as pins to hold the cover, nuts would make life difficult.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode