I am looking for everyone's thoughts on replacing the fan that is on my BX with an electric unit (similar to what is on a small car). I like that fact that the radiator stays clean in the summer because it blows away from the driver into the engine compartment. But in the winter, this would serve to suck heat from an enclosed cab.
I was wondering if a DC fan unit would solve my problems. I figure that with a flick of a switch, I could change from summer mode to "driver heater" mode.
I have only taken a quick look at the current fan. Is it as simple as removing the blade and fabbing up the new electrical unit from a space perspective?
Don't be shy, poke holes in my plan!
Thanks
I was wondering if a DC fan unit would solve my problems. I figure that with a flick of a switch, I could change from summer mode to "driver heater" mode.
I have only taken a quick look at the current fan. Is it as simple as removing the blade and fabbing up the new electrical unit from a space perspective?
Don't be shy, poke holes in my plan!
Thanks