priming L 3350 Kubota

   / priming L 3350 Kubota #1  

auroco

New member
Joined
May 17, 2008
Messages
3
Working on a neighbors Kubota L 3350, found the fuel filter full of water. now can not get it primed. Anyone know tricks for the tractors?
 
   / priming L 3350 Kubota #2  
To start open bleeders, you can fill filters proir to installation for less frustration. There are times more then one injector needs to be loosened at once but with most systems you can only do one at a time.
 
   / priming L 3350 Kubota #3  
Hope this helps. On my Grand L3130 The procedure indicates to
1:eek:pen the fuel cock on the filter,
2:Open the air vent cock on the fuel injection pump.
3:start the engine and run for about 30 seconds and then stop the engine, 4:close the air vent cock

This is the procedure I have used after replacing the fuel filter.
 
   / priming L 3350 Kubota
  • Thread Starter
#4  
Thanks for the tips, I'll try them this week end.
 
   / priming L 3350 Kubota
  • Thread Starter
#5  
Turns out the problem is a cloged shut off valve at bottom of tank.
 
   / priming L 3350 Kubota #6  
How did you find it?
 
 
Top