Results 1 to 6 of 6
-
05-19-2008, 07:05 PM #1New Member
- Join Date
- May 2008
- Posts
- 3
priming L 3350 Kubota
Working on a neighbors Kubota L 3350, found the fuel filter full of water. now can not get it primed. Anyone know tricks for the tractors?
-
05-19-2008, 09:53 PM #2Super Member
- Join Date
- Apr 2000
- Posts
- 5,849
- Location
- central New York
- Tractor
- all makes and models
Re: priming L 3350 Kubota
To start open bleeders, you can fill filters proir to installation for less frustration. There are times more then one injector needs to be loosened at once but with most systems you can only do one at a time.
-
05-20-2008, 10:35 AM #3Silver Member
- Join Date
- Dec 2007
- Posts
- 114
- Location
- Thumb of Michigan
- Tractor
- Kubota L3130DT-F
Re: priming L 3350 Kubota
Hope this helps. On my Grand L3130 The procedure indicates to
1
pen the fuel cock on the filter,
2:Open the air vent cock on the fuel injection pump.
3:start the engine and run for about 30 seconds and then stop the engine, 4:close the air vent cock
This is the procedure I have used after replacing the fuel filter.
-
05-22-2008, 09:24 PM #4New Member
- Join Date
- May 2008
- Posts
- 3
Re: priming L 3350 Kubota
Thanks for the tips, I'll try them this week end.
-
05-25-2008, 04:40 PM #5New Member
- Join Date
- May 2008
- Posts
- 3
Re: priming L 3350 Kubota
Turns out the problem is a cloged shut off valve at bottom of tank.
-
05-26-2008, 11:42 AM #6
Re: priming L 3350 Kubota
How did you find it?
George
South Carolina
The size of government is inversely proprotional to the degree of freedom it affords.
"What is truth?" Pontius Pilate


Reply With Quote
