Michael Knight
Member
I changed out my hyd fluid this week with the filter. After I drove it around a couple of times, I topped it off and everything seems fine. It shifts and runs smooth, and the hydrolics work great. Anyways, it never had much in the way of brakes before (from the factory, this was the 50 hr service) but now they really work well. the only thing I am trying to figure out is that when you do a pedal turn, it squeals like crazy. Mostly this is if you dont have the brake totally locked. If you get that inside wheel locked well, it stops, but any brake slippage makes a horrible EEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEe noise. It has however seemed to subside as I used the tractor, because I had to do some bushogging for a couple of hours and I wasnt using the pedals to turn much anyways.
Do I need to put posi traction additive or something in there? It had the factory fluid, whatever that is SUDT or UDT and I put in a local brand "Super S" 303 type fluid that says its compatible with Kubotas. Everyone I asked said it was good stuff and wouldnt be any problems.
Do I need to put posi traction additive or something in there? It had the factory fluid, whatever that is SUDT or UDT and I put in a local brand "Super S" 303 type fluid that says its compatible with Kubotas. Everyone I asked said it was good stuff and wouldnt be any problems.