L3400 Site Glass

Wayne_Freeman · 06-14-2008, 05:34 PM

I know this sounds dumb but I have lost the oil level in my site glass. Now I am not sure if the oil level is above or below the glass. I have tried doing some measurements and a dip stick but there must be a way to get it back in? Can one of you bota vets give me a heads up?

wushaw · 06-14-2008, 05:39 PM

You can just unscrew the site glass and see if it pours out. Be careful since it is made of hard plastic.

Wayne_Freeman · 06-14-2008, 07:58 PM

Thanks! That worked just fine.

06-14-2008, 05:34 PM	#1 (permalink)
Wayne_Freeman Silver Member Join Date: Apr 2004 Location: Beaufort, SC Posts: 190	L3400 Site Glass I know this sounds dumb but I have lost the oil level in my site glass. Now I am not sure if the oil level is above or below the glass. I have tried doing some measurements and a dip stick but there must be a way to get it back in? Can one of you bota vets give me a heads up?

06-14-2008, 05:39 PM	#2 (permalink)
wushaw Elite Member Join Date: Mar 2005 Location: Bristol Texas Posts: 2,513	Re: L3400 Site Glass You can just unscrew the site glass and see if it pours out. Be careful since it is made of hard plastic. __________________ Kubota L2800HST, Mitsubishi 372, bh75, 45" Agric tiller, 5' home made disk, 42" Bush hog, PHD, 66" Cammond BB.

06-14-2008, 07:58 PM	#3 (permalink)
Wayne_Freeman Silver Member Join Date: Apr 2004 Location: Beaufort, SC Posts: 190	Re: L3400 Site Glass Thanks! That worked just fine.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode