|
|
|
 |
|
 |
|
||||||||||||||||||||||
|
||||||||||||||||||||||
07-21-2008, 10:42 PM
|
#1 (permalink) |
|
New Member
Join Date: Jun 2008
Posts: 4
|
FLASHING LIGHTS
HI i am new to this sight and seen there was a kubota only section so i am reposting it here.... has anybody ever had this happen to them. i have a new b-7800 and i look out side and the 4 ways where flashing by the time i got out side they where off. i went back in the house and about 5 mins. later they where on again i thought some one was screwing with me but the button was not pushed. any thoughts????
THANKS |
|
|
|
07-21-2008, 11:03 PM
|
#2 (permalink) |
|
New Member
Join Date: Jul 2008
Posts: 5
|
Re: FLASHING LIGHTS
Interesting problem - never happend to me but I just spent a whole day wiring up worklights (should have been a 1 hour job...) and I got more familiar with the electrical system than I wanted to. You must have a loose connection somewhere - tried jiggling the switch? Or tracing the wire back to the fuse block - maybe the fuse is loose?
Snoho3 |
|
|
|
|
07-22-2008, 10:07 PM
|
#3 (permalink) |
|
Member
Join Date: Nov 2005
Location: CT
Posts: 27
|
Re: FLASHING LIGHTS
It happened to me on my BX23 when I first got it three years ago. The dealer had it outside for a number of months before I bought it and the switches are not watertight. It took me a couple of events like yours, but after blowing out the switch, and storing it under roof it has not happened again in over 2 1/2 years.
FRAN3 |
|
|
|
|
07-23-2008, 06:37 AM
|
#5 (permalink) |
|
Silver Member
Join Date: Mar 2004
Location: Australia
Posts: 102
|
Re: FLASHING LIGHTS
Got so sick of it flattening the battery that I removed all wiring from the flasher and head light switches.
The switches get moisture in them and the electronic control ccts go crazy.
__________________
BX23 |
|
|
|
|
07-24-2008, 12:24 PM
|
#7 (permalink) | |
|
Silver Member
Join Date: Jan 2006
Location: Mass, Northshore, Merrimack Valley
Posts: 197
|
Re: FLASHING LIGHTS
Quote:
As does WD-40. .
__________________
Dan C. B6100DT, FEL, BH |
|
|
|
|
|
07-24-2008, 01:41 PM
|
#8 (permalink) |
|
Super Star Member
Join Date: Mar 2002
Location: Central florida
Posts: 18,172
|
Re: FLASHING LIGHTS
The wd-40 seems to evaporate pretty fast though.. A few days after spraying and it's gone... that's why i use the silicone lube for dewattering.. seems to stay in place longer. But Yeah.. both work well for the intended purpose.. etc.
soundguy |
|
|
|
|
07-24-2008, 07:02 PM
|
#9 (permalink) |
|
Platinum Member
Join Date: May 2004
Location: Conifer, Colorado
Posts: 945
|
Re: FLASHING LIGHTS
Don't use WD40 - it'll attract and hold too much dust, then you'll have all sorts of problems. Silicone spray shouldn't attract as much dust, but it still may attract some. Dust is as big a problem on those switches as water is.
Best thing to use is an electrical parts cleaner in a spray can that you can get at any auto parts store. Once you get it cleaned up, and if you don't store it outside without a cover, your problem should be pretty well solved.
__________________
2008 Kubota B3030, w/block heater, filled R4s, 40 amp alternator, fender mount joystick, LA403 w/60" bucket, BH75 w/12" bucket, pin-type QA, pallet forks, Landpride RB2572, Bro-Tek thumb, Midwest LR2072 rake, Rhino SE4 rotary mower, Landpride RTA 1550 tiller, EZmover Hitch, Pat's Easy Change. Click here for Tractor photos |
|
|
|
 |
||
| Thread Tools | |
| Display Modes | |
|
|
|
||||||||||||||||||||||
| About TractorByNet.com | Terms of Service | Advertise | © 2008 TractorByNet.com |
Linear Mode
