Results 1 to 5 of 5
  1. #1
    Bronze Member
    Join Date
    Mar 2008
    Posts
    70
    Location
    Red Hook, Dutchess County

    Default Kubota D1105 Engine

    Need help..from knowledgeable kubota engine rebuilders

    I have an Airman AX15-2U excavator with a Kubota D1105 engine.

    I need an engine gasket kit to put it back together after pulling the head - wanted to make sure everything looked good even thought cranking pressure reached 620lbs in each cylinder - it started smoking during a brief oil change..after running hot. I thought I had a ring problem or oil seal problem and found out that there was nothing wrong...just too much oil in the engine for a very brief period along with a messed up radiator setup by the original owner.


    Here is my problem....I want an engine gasket kit to replace some leaking gaskets while I have it out....along with a new head gasket and oil seals. The dealers I went to do not want to sell me anything since it is not for a specific tractor.

    I found out that this D1105 is a rebuilt engine..and probably only has a few hours of time on it...must have been replaced just before they sold me the mini-excavator since I found a sticker Date of 2007 on it.

    It has a 3 step oil pan (probably only takes just over 3 quarts compared to most D1105 rebuilts - 5+ quarts). It may be very similar to the engine out of a B2630 tractor (it also only takes about 3.2 quarts).

    Can I just order a full gasket set for B2630 and assume those gaskets (oil and head) will work on this engine. I included everything I could find on the engine below.

    If you know where I can order a engine gasket set from please let me know. So far no one will sell me one...even online.

    D1105 Block Serial Numer 5U3393

    Other engine block markings
    5X2 54 1.123L

    Valve cover markings
    D1105-EU2
    D1105D 5X2
    3KBXL01.5BCD

    D1105-ES

    5KXBL01.5BCD
    ECSLEM
    19.7KWatts


    THANKS! Hopefully I can get this back together soon.

  2. #2
    Gold Member
    Join Date
    Aug 2008
    Posts
    264
    Location
    ElDorado,AR
    Tractor
    Ford 4000 diesel

    Default Re: Kubota D1105 Engine

    There is a company called CK Power in I think St. Louis, MO. Not sure on the St. Louis part its been awhile since I dealt with them, but they deal with kubota industrial engines. With the numbers you have you should not have any problems getting the parts from a industrial dealer. I would not bet on the tractor engine gasket sets being the same.

  3. #3
    Gold Member
    Join Date
    Aug 2008
    Posts
    264
    Location
    ElDorado,AR
    Tractor
    Ford 4000 diesel

    Default Re: Kubota D1105 Engine

    They have a website ckpower.com and they are in St. Louis. Check them out they should be able to help you out.

  4. #4
    Bronze Member
    Join Date
    Mar 2008
    Posts
    70
    Location
    Red Hook, Dutchess County

    Default Re: Kubota D1105 Engine

    Thanks,

    I sent them an inquiry to see if the can fill my order.

  5. #5
    638
    638 is offline
    Platinum Member
    Join Date
    Feb 2005
    Posts
    626
    Location
    Southern Indiana
    Tractor
    BX23
    ron

    I was better, but I got over it.

    Life may change us, but we start and end with family.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2013 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.