ewoz
Member
I have a BX2230 with a BX2750B snowblower. I am trying to use a hydraulic motor to rotate the chute. I mounted up the motor and connected to the control valve so that when the control valve is pushed to the right or the left the chute rotates clockwise or counter-clockwise. The problem I am having is when the control valve is moved to the right. The control valve that I have has two positions in the right direction. In the first position it appears that the valve puts hydraulic pressure on one line going to the motor but does not connect the second line going to the motor to the return port. When the control valve is pushed all the way to the right the return line does connect to the return port. My hydraulic motor does not like that first position of the control valve. Is there a way to modify the control valve so that when the control valve is set to the first position to the right that the return line from the motor will be connected to the return port?
Thanks.
Ed
Thanks.
Ed