Results 1 to 4 of 4
  1. #1
    New Member
    Join Date
    Dec 2008

    Default B7100 w/ B219 Loader: Valve Question

    I have a B7100 4WD with a B-219 loader. The lever on the control valve which operates the bucket angle is seized solid; the up-down lever works fine. I can't seem to find a part number for the valve. Can any 2-spool valve be used? Does anyone have experience of repairing the original valve or replacing it? Should I go with a genuine kubota part? Is there a chance that the valve is OK and the cylinder seized? -- how can I tell?

    Thanks everyone.


  2. #2
    Platinum Member Bill Barrett's Avatar
    Join Date
    Jul 2006
    Kubota L3130, Satoh G650, Case 580, Case 446

    Default Re: B7100 w/ B219 Loader: Valve Question

    I've had valves Freeze? Water in the caps on bottom of spools.

  3. #3
    Advertiser kennyd's Avatar
    Join Date
    Jul 2003
    Westminster, MD
    John Deere 3720 CAB, 455AWS

    Default Re: B7100 w/ B219 Loader: Valve Question

    Welcome to TBN

    I would guess with some careful inspection your valve can be saved, It could be a simple linkage problem, or the spool could have a little rust on it.

    Have you done any dis-assembly of the valve? If you don't feel comfortable you could take it to a local hydraulic shop and have them take a look.

    If yours cannot be repaired, then this joystick valve from the SurplusCenter is a great replacement.


    Bolt-On Grab HooksTM, Bolt-On Clevis MountsTM, Weld-On Grab Hooks, Specialty Chain and Rigging Accessories, Specialty Hydraulic Components, and MUCH more!

    Visit our YouTube Channel

  4. #4
    Silver Member
    Join Date
    Jun 2008
    west virginia
    1994 Kubota B7100 HST 4WD

    Default Re: B7100 w/ B219 Loader: Valve Question

    ah that's terrible, well it's junk now so i'll go ahead and take the loader off your hands and relieve you of that non working jalopy.

    just kidding, welcome aboard, these jokers will get you straight quick.
    1994 Kubota B7100 HST 4WD
    60" Kubota MMM, 48" Landpride Bush hog, snow blade, 6 blade disc, plow

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
© 2017 TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.