Results 1 to 6 of 6
  1. #1
    Platinum Member BlacknTan's Avatar
    Join Date
    May 2006
    Posts
    958
    Location
    Adirondacks of NY
    Tractor
    Kubota B-7800

    Default Add a step

    Gettin older and the knees don't eork so good anymore..
    Has anyone added a step to a B-7800 to make gettin' on and off easier?

  2. #2
    Bronze Member
    Join Date
    Jul 2009
    Posts
    77
    Location
    the first state
    Tractor
    kabota b7800

    Default Re: Add a step

    have seen some advertised, but was afraid of lowering the ground clearance.

    around here there's elevated concrete slabs for getting on and off your horse and in and out of carriages. just build a little set of wood steps and put it next to where you keep your tractor.

  3. #3
    Bronze Member
    Join Date
    Jul 2009
    Posts
    77
    Location
    the first state
    Tractor
    kabota b7800

    Default Re: Add a step

    also, i was concerned with having something bolted to the frame that would do more damage to the tractor if i drove over something and bent the step. like the suv tire holders that bend the back door and bust out the glass in a minor accident.

  4. #4
    Super Member ronjhall's Avatar
    Join Date
    Apr 2000
    Posts
    8,640
    Location
    SE Michigan, AZ when its cold in MI.
    Tractor
    Kubota 2910 HST

    Default Re: Add a step

    Check out this thread. FOOT STEP B2710, B2910 & B7800.


  5. #5
    Platinum Member woodchuckie's Avatar
    Join Date
    Jan 2005
    Posts
    636
    Location
    Moundville,AL
    Tractor
    KUBOTA L 2800

    Default Re: Add a step

    My step on my L2800 stayed bent because of the ground clearance issue so following the advice of someone else here I made one out of chain. It's still doing fine over two years later. Here's a pic. http://www.tractorbynet.com/forums/a...tep-small-.jpg

    Here's the thread. http://www.tractorbynet.com/forums/k...00-step-2.html

  6. #6
    Silver Member rpraymond's Avatar
    Join Date
    Dec 2006
    Posts
    218
    Location
    Madison Co., central NY
    Tractor
    Kubota L3430HSTC, Kubota B2320 w/FEL, Allis-Chalmers D10

    Default Re: Add a step

    Here's the step I put on my B2320. The bar going back from the step keeps it from flexing and if ground clearance isn't a problem it works fine.
    Attached Thumbnails Attached Thumbnails Add a step-000_0035-jpg   Add a step-000_0036-jpg   Add a step-000_0037-jpg  
    Kubota L3430HSTC w/72" front mounted snowblower, Kubota B2320 w/FEL, Allis-Chalmers D10, 60" Bush Hog, 3pt. woodsplitter, Goosen 3pt. chipper/shredder, Woods rototiller, Landpride GS1548 grading scraper.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2017 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.