Results 1 to 3 of 3
  1. #1
    Member gjock's Avatar
    Join Date
    Nov 2008
    Posts
    25
    Location
    watertown, New York
    Tractor
    2008 kubota bx2660

    Default bx front mount blower

    I have the front mount snowblower installed on my bx2660. I have greased and oiled everything, it seems loud compared to my walk behind blower. Is this normal?

  2. #2
    Gold Member Dyer, retired's Avatar
    Join Date
    Feb 2008
    Posts
    469
    Location
    Belgrade, Maine
    Tractor
    2003 Kubota BX1800 and 2010 B3030

    Default Re: bx front mount blower

    It is normal and you get used to it. The blower quiets down somewhat when you start pulling snow through it. I would check the allen screws along with any nuts and bolts after a few uses. When my BX 2750 blower was new, I found things loosened up quickly and had to be re-tightened. The bolts that attach the quick connect frame to the blower were amazingly loose after a couple of snowfalls. I used loctite blue on most everything and have not had the problem since. Have fun with the new blower! Dyer, retired

  3. #3
    Member gjock's Avatar
    Join Date
    Nov 2008
    Posts
    25
    Location
    watertown, New York
    Tractor
    2008 kubota bx2660

    Default Re: bx front mount blower

    Thank you

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.