Results 1 to 2 of 2
  1. #1
    New Member
    Join Date
    Sep 2005
    Posts
    0

    Default B6200 Hydraulics

    Just recently purchased a '85 B6200,and need to figure out how to get more hydraulic power. I have a hydraulic drive bush hog, wood splitter, and tiller on my 448 Case (Ingersol), that I want to run off of the 6200. The problem is that the kubota puts out 4 gallons per minute, and I need 8 to run my attchements. Is it possible to upgrade the pump, or to mount a P.T.O. driven pump? Any info would be helpful.


  2. #2
    New Member
    Join Date
    Sep 2005
    Posts
    0

    Default Re: B6200 Hydraulics

    If you were to upgrade your pump, most likely the existing hydraulic lines would be too small to handle the additional volume. Northern Tool carries PTO pumps that are rated like 22 and 40 gpm. This would be easy to adapt to your existing hydraulics.

    Hope this helps.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2013 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.