Results 1 to 2 of 2
  1. #1
    Gold Member
    Join Date
    Sep 2005
    central, Pa

    Default anyone use a pull type disc with a BX ?

    just wandering if anybody out there is using an older pull type disc behind their BX for garden work? if so what size? I have noticed some smaller one's coming up at upcoming sales in the coming weeks.
    Doing the difficult in a day,The impossible takes slightly longer ----- BX2230 with loader, RTV900 with power angle plow

  2. #2
    Elite Member gwdixon's Avatar
    Join Date
    Jul 2009
    Northern CA

    Default Re: anyone use a pull type disc with a BX ?

    I used a very light duty 5' Athens disc on a BX2200 before selling the disc. Soil penetration wasn't that impressive. The turf tires did a fine job and didn't seem to slip as much as was expected.

    There are discs made for ATVs so the BX is fine with a light disc. The ATV ones have wheels for transporting it and they are drag only of course. Tractor Supply sells one that is about 4' wide.

    My wife thinks they are "cute". (gag)

    Edit: Almost forgot to mention that the 3 PH lift arms on the BX are so low that there is not much room left to get the disc off of the ground without shortening the top link.
    2009 Kubota M7040, R1s, LA1153 FEL, fork lift, 3 rear remotes, T&T
    2002 Kubota L48 TLB, 12", 18", 24" HD buckets
    2001 Kubota BX2200, Turf, LA211 FEL
    7.5' Howse 3PT disc, 88" Gearmore 4G4 box scraper, 4' box scraper, Gearmore GB85 blade, LandPride RCR2596 cutter, 6', 4' flail mowers, 6', 4' rototiller, 4' Bush Hog cutter, HD subsoiler, Bearcat 70554 chipper, Bush Hog PHD w/ 12", 6" augers, Ford 101 3-bottom plow, 8' land leveler, 6' rake, lots of misc.

Similar Threads

  1. Building A small pull pan Type scraper
    By earthface in forum Build-It Yourself
    Replies: 96
    Last Post: 09-04-2014, 07:40 AM
  2. pull behind discs
    By tmarks in forum Attachments
    Replies: 32
    Last Post: 08-10-2009, 07:41 AM
  3. How wide of a disc can I pull?
    By dweitzel in forum Attachments
    Replies: 29
    Last Post: 06-03-2007, 11:24 PM
  4. Rear finish mower to pull type?
    By Suess in forum Build-It Yourself
    Replies: 7
    Last Post: 01-23-2005, 07:45 PM
  5. Rotary Cutters:3pth or pull type?
    By scotd1 in forum Attachments
    Replies: 9
    Last Post: 05-27-2001, 07:54 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
© 2018 TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.