krickard
Member
Need some advice on a steering cylinder problem I was using the L3600 to fill in where a log skidder had pulled logs from the woods and making a road way again. The cap end to the steering cylinder seperated from the body and dumped the oil pulled the tractor into the shop with 2nd tractor and removed everything down to the cylinder and removed could see no damage so pressed the cap onto the body reinstalled the retainer ring and put everything back together,no leaks only now when turning the steering to the right the steering rod goes into the cap so this would pop the cap loose centering the wheels appears equal turning to left and to the right so pitman must be right and the toe in seems close to correct as far as know never worked on before. any suggestion what to look for ? Nothing apears bent. se'ya ken