Behrend II
Bronze Member
Hi, I need to replace the blades for my 54" mid-mount mower on my B2400. Do I need to get them from a dealer or can I find them from an aftermarket manufacturer?
Mowing Replacement blades
- Thread starter Behrend II
- Start date
KennyV
Elite Member
- Joined
- Sep 1, 2004
- Messages
- 2,582
- Tractor
- Kubota L4200 GSTCA
There are a lot of sources for blades...
If you know how to measure what you need you can get a larger selection,...
Length is measured diagonally from cutting tip to cutting tip, if it is rounded off, allow for the missing material in your measurement.
Width and thickness...
The mounting hole diameter...
Oregon has some great blades, regular, high lift, and mulching....
KennyV
If you know how to measure what you need you can get a larger selection,...
Length is measured diagonally from cutting tip to cutting tip, if it is rounded off, allow for the missing material in your measurement.
Width and thickness...
The mounting hole diameter...
Oregon has some great blades, regular, high lift, and mulching....
KennyV
OP
Behrend II
Bronze Member
Thanks Kenny, so you're saying that any blades with the same measurements should work?
WilliamBos
Super Member
- Joined
- May 1, 2004
- Messages
- 5,316
- Location
- Innisfil, Ontario, Canada
- Tractor
- MF 1635 12x12 Powershuttle
That is nice to know. Maybe could be in a sticky for others to find quickly??
KennyV
Elite Member
- Joined
- Sep 1, 2004
- Messages
- 2,582
- Tractor
- Kubota L4200 GSTCA
Absolutely...they will work, and you can select the best blade for your use... there are many sources of blades... you just need to know your measurements..
I'm not sure if they are the only source of Gator blades, but they make them, I have gator mulching blades on my 72 inch ZTR... KennyV