Rubber step mat on B2620

[Evil the Weasel]

Is it just me or is the rubber step mat horrible quality? The nipples that keep it secured to the floor of the tractor have crumbled and now it just kind of lays on there poorly. 60 bucks for a replacement also.

 

[JOHNTHOMAS]

Saw either here or over on the TBN Utility Vehicle site where some have been spraying their steps up on to bigger tractors and their floor plates on different tractors and vehicles with the Bedliner in a spray can. Looked great and I'll be doing it to different parts on different tractors and RTV. I already have some in Gallon cans but I'm going to get some spray cans to check them out. Maybe two or three coats and your covered.

 

[k0ua]

I did mine over a year and 100 hours ago.. Here is the thread. Post 21 has pictures. It has held up well, and really helps boot traction too.

http://www.tractorbynet.com/forums/customization/177061-using-truck-bed-coating-floorboards-3.html

James K0UA

 

[General Lee]

Is it just me or is the rubber step mat horrible quality? The nipples that keep it secured to the floor of the tractor have crumbled and now it just kind of lays on there poorly. 60 bucks for a replacement also.

No, its not you they are crap. When I had my B3200 within 40 hours the mat had a hole worn through it and some of the nipples were shot.