54"mmm bagger boot kit, right kit or not?

   / 54"mmm bagger boot kit, right kit or not? #1  

MerkurRS

New member
Joined
Mar 7, 2010
Messages
24
Location
Spring City, PA
Tractor
2010 Kubota BX1860
I purchased a boot kit for my BX1860 that is equipped with the RCK54P-23BX mid mount mower.
I am not sure I received the correct kit, so I figured I would ask here first, before I call the dealer and look stupid.
The instructions say the boot is number K6056-3003-0, but the numbers that are cast in the plastic boot are: K6056-3101 and K6056-3102. Does this indicate it is a superseded number, or just wrong? The stay-pin doesn't actually seat due to obstruction of the boot to the deck. The deck I have looks like it has the deck-stay pin welded on at the factory and the bracket included is not necessary.
Also, the mower plate (the large orange steel plate) is actually taller that the deck is deep, causing me to think the plate is wrong too.
Are any of these questions I have been experienced yet?
I would appreciate any help including pictures of how this mounts.
Thanks!
 
   / 54"mmm bagger boot kit, right kit or not?
  • Thread Starter
#2  
Just as an FYI;
I found out today that the fine-cut deck DOES take a different boot kit than the standard mower deck.
Something to remember..........:thumbsup:
 
 
Top