Front Rims for B9200 Needing a used pair

[npalen]

These are 12"x7" to take 23 x 8.50 x 12 tires The 6-bolt BCD is 115mm (4.53") and the pilot is 69.5mm (2.74") Two piece rims are standard on this model but single piece would be fine.

[npalen]

Let me ask then if there is a reason for the two piece wheel rims on the Kubota? I suspect that it is economy of manufacture but perhaps another reason such as easier mounting/dismounting of tires?
The ones on my B9200 have been reinforced by a previous owner probably from too much weight on the loader. I'm going to either replace them, which seems doubtful at the moment, or repair them with some laser cut weld-in centers with the six bolt holes, probably from 1/4" plate. The original two halves appear to be made from 3MM (little under 1/8") thickness.

Edit: Might mention that the two halves that make up the wheel rim appear to be identical with the exception of the valve stem hole.

[npalen]

Any thoughts on why Kubota used two piece rims? Any harm in welding them together as one with the lasered center mentioned above?
Thanks.

[moeh1]

2 piece were easy to mount tires on by splittting the rim but were prone to cracking ( I think due to shifting)My 2150 cracked one rim, then the other. Order the one piece replacement and you'll be all set forever....

[Randyj]

I have a brand new pair of heavy duty front rims
That I was going to use on my B9200, but didn't.
I don't plan on using them, and would like to sell them. If you are interested, I'll give you the exact size, price, & post some images.

[RobertN]

That should be a common size with B8200, B2150, B2710, B2910. All those had the same size tires.

[npalen]

I have a brand new pair of heavy duty front rims
That I was going to use on my B9200, but didn't.
I don't plan on using them, and would like to sell them. If you are interested, I'll give you the exact size, price, & post some images.

Yes, definitely interested.

[npalen]

I have a brand new pair of heavy duty front rims
That I was going to use on my B9200, but didn't.
I don't plan on using them, and would like to sell them. If you are interested, I'll give you the exact size, price, & post some images.

Would anyone have other contact information for Randy that you could PM to me? I sent him a PM but I don't think he checks in here very often.
Thanks

[npalen]

Bump--Looking for some contact info for RandyJ.
Thanks