nightowl490
Bronze Member
I shucked a fuel line to the injector pump which did kill the tractor. After getting to it decided to change out all lines from filter forward, changed fuel filter, selinoid, selinoid linkage. Also drained fuel out of tank and changed out petcock (had a small leak). My issue is this, I have repeated the bleeding process (via manual) repeatedly (12-15 times) and cannot get it to even puff/cough. I have bled before after refinishing fuel tank 2 years ago and don't recall this being so difficult. All lines are open, fuel in sediment "bulb", tank is full.
Any ideas?
By the way I also changed out a fuel line on top of motor between injectors that was cracking and looking frail.
Go Ronnie go at tractorsmart!
Any ideas?
By the way I also changed out a fuel line on top of motor between injectors that was cracking and looking frail.
Go Ronnie go at tractorsmart!