Results 1 to 3 of 3
-
10-08-2012, 06:47 PM #1
- Join Date
- Nov 2011
- Posts
- 9
- Tractor
- Kubota BX25
BX 25 - Throttle not staying in high/fast position
Hi all,
Recently it seems to be having an issue with my throttle level on my BX 25. I place the throttle level in the fast/full position and it idles at around 3300 rpm and then seconds later the levers starts to ease up and move to about 2700 RPM. It will not stay on the high throttle. Is it just a matter of tightening the nut under cover where the lever connects to the cable?
thanks
-
10-08-2012, 08:42 PM #2
Re: BX 25 - Throttle not staying in high/fast position
no there is a metal clamp near the dashboard holding down the throttle cable that just needs a little finessing to tighten up to hold cable better.
-
10-08-2012, 10:05 PM #3
- Join Date
- Dec 2009
- Posts
- 2,997
- Location
- Kansas...USA
- Tractor
- Kubota B2620 , Case 448 , Kubota B2650
Re: BX 25 - Throttle not staying in high/fast position
After over 200 hrs my BX2660 throttle lever started doing that. As I recall there was a nut under the dash that solved the problem for me. Cheers, Mike
Kubota B2620 (2012) Case 448(1983) Kubota B2650 (2018)
Similar Threads
-
4510 throttle lever not staying put...
By NCDeere in forum John Deere Owning/OperatingReplies: 9Last Post: 08-20-2007, 04:32 PM -
Throttle Position?
By Yseesee in forum John Deere Owning/OperatingReplies: 2Last Post: 06-15-2007, 01:06 PM -
joystick - float not staying in up position
By txdon in forum Kubota Owning/OperatingReplies: 9Last Post: 02-25-2007, 11:14 AM -
CK130 loader bucket not staying in position.
By conklinfarms in forum Kioti Owning/OperatingReplies: 8Last Post: 05-01-2006, 09:09 AM -
throttle not staying set
By pshubert in forum New Holland Owning/OperatingReplies: 12Last Post: 11-09-2004, 06:28 PM