weight on front end

   / weight on front end #2  
Where are you going to carry the weight? In the loader bucket or as weights on the front wheels. etc. It makes a difference.
 
   / weight on front end #3  
In addition to repetes question: how much counterbalance weight will you have on the rear end, and how far aft of the rear axle will it be?
You need to strategically arrange the weights on both sides of the rear axle (fore and aft) to get a desired front axle loading.
Too light and your front steering and 4WD won't be very effective.
Too heavy and you'll lose rear axle traction and you may overload/damage your front axle/drive system.
It's a balancing act that you should get good at with a little practice.
 
   / weight on front end #4  
The standard front weight bracket holds up to 5 55 lb. weights. This should be sufficient ballast for either the L3200 or the L3800 tractors.
 

Tractor & Equipment Auctions

iDrive TDS-2010H ProJack M2 Electric Trailer Dolly (A55851)
iDrive TDS-2010H...
2010 Ford F550 Bucket Truck with Altec AT37G Boom (A56435)
2010 Ford F550...
FRONT BLADE (A52708)
FRONT BLADE (A52708)
2006 Chevrolet Express 3500 Versalift Vantel29N 29ft Bucket Van (A56858)
2006 Chevrolet...
2009 IC Corporation PB105 School Bus (A55973)
2009 IC...
2008 Ford Taurus SEL Sedan (A55973)
2008 Ford Taurus...
 
Top