looking for 101 off the wall uses for my kubota

[avc8130]

Chicken Coop?

 

[TheWedge]

Wildlife transport.

 

[ljohnson778]

Anyone can use the bucket as a cooler but, you need something to go along with those frosty beverages.....

<img src="http://www.tractorbynet.com/forums/attachment.php?attachmentid=290821"/>

<img src="http://www.tractorbynet.com/forums/attachment.php?attachmentid=290822"/>

:drink: :cool2:

I do like your style...

 

[CaptRonB3030]

I have a 12 year old still working hot tub that has reached, ( I am told ), It's life expectancy. I can't trust it to make all the way through the winter without breaking down, and freezing, so I put it away in my heated shop.
I made a jig out of channel that my forks pocket into and slide it under.
I have done this for two seasons now and it works great.

 

[wildcatblue]

Changing that fuel pump in my truck just got a lot simpler thanks to the kubota.:thumbsup:

 

[wildcatblue]

Installing that white oak beam for my tractor shed wasn't so bad with the B3200, had to put some blocks under the front tires cause it was not quite tall enough but it worked out great.

 

[Creamer]

Installing that white oak beam for my tractor shed wasn't so bad with the B3200, had to put some blocks under the front tires cause it was not quite tall enough but it worked out great.View attachment 292061

How did you get the beam up there to start with? balance it on top of the scoop while lifting it and driving it up on blocks?

 

[wildcatblue]

I had it clamped down to the bucket with bar clamps, it layed perfectly flat on top of the bucket..

 

[RaydaKub]

Changing that fuel pump in my truck just got a lot simpler thats to the kubota.:thumbsup:<img src="http://www.tractorbynet.com/forums/attachment.php?attachmentid=292060"/>

Wow, where is the fuel pump on that Chevy that taking the box off is easier than <whatever> ?

 

[wildcatblue]

Fuel pump is on top of the fuel tank and inside most are like that now, removing 30 gal tank on the ground is a real pain with no lift, 8 bed bolts & 3 screws that hold the fuel filler, disconnect wiring harness at the back with just 2 connectors to the bed and she's off total 15 min. I used 4 straps to lift it up with the Kubota and bam everything is easy to get to now.