DennisArrow
Platinum Member
- Joined
- Jul 4, 2003
- Messages
- 766
- Location
- Sugar Valley, Ga
- Tractor
- Iseki TL 2300, Kubota RTV, Kubota B7610
I know this must be fairly simple but it's a problem to me. I have a B7610 that I acquired a few months ago with 426 hours on it. Everything works and it is really a strong machine. Anyway, I noticed the other day that the turn signals flash opposite what they should. When you turn the little lever left the lights indicate right. Obviously, someone has reversed the connections on the flasher or the switch. I see on the parts diagram that there are 2 screws on the bottom sides of the shroud.
What is the trick for getting the shroud off? Yes of course you remove the screws but is there a tab or something someplace that needs to be depressed or what. A step by step procedure to get to where I can switch out the connections for the turn signal wiring would really be appreciated...........
Oh another thing.....the steering wheel is turned a bit off center when pointed straight ahead. How do you remove the steering wheel?????..............Does one need a puller or anything?
Thanks for the help ahead of time.....God bless.........Dennis
What is the trick for getting the shroud off? Yes of course you remove the screws but is there a tab or something someplace that needs to be depressed or what. A step by step procedure to get to where I can switch out the connections for the turn signal wiring would really be appreciated...........
Oh another thing.....the steering wheel is turned a bit off center when pointed straight ahead. How do you remove the steering wheel?????..............Does one need a puller or anything?
Thanks for the help ahead of time.....God bless.........Dennis