Results 1 to 2 of 2
  1. #1
    Super Star Member Gary Fowler's Avatar
    Join Date
    Jun 2008
    Bismarck Arkansas
    2009 Kubota RTV 900, 2009 Kubota B26 TLB & 2010 model LS P7010

    Default Flat rear tire on the B26

    I was out levelling some dirt with the B26 that I had dumped on the pond levees with my LS and was just about finished levelling and compacting it when I heard a scraping on the fender, looked over and right rear tire was flat. I was up on the pond levee at the moment, so I used the outrigger to lift it up. I went to my shop, got the air compressor on and tank filled then hauled it to my B26. I took a 2" rachet strap to try to compress the center to make the bead reseat but it just wasnt enough force. Tried to put air in and it just wouldnt seal. Went back to the shop and got my 1" drive sockets and removed the tire, rolled it over to my kubota RTV which still had the compressor in it and was contemplating how to load the tire to take it to the shop to work on it. Then I noticed that during the rolling to the RTV, it looked like the bead was pretty well seated so I popped on the air hose and sure enough it sealed off and aired up the tire. Max pressure on the little tire was listed as 30PSI so I put 25 PSI in it and remounted it to the tractor. Finished compacting the fresh dirt and drove to my shop. Checked the rest of the tires: Left rear had 10 PSI, fronts had 18 PSI with 35 listed as max. I put 32 in the front and aired the left rear to 25 to match the other side. Now will have to keep an eye on them to see if they all stay at that pressure. Even at 10 PSI on the rear, it was just barely squating but with the backhoe on it , I wanted more air so I dont roll another one off. Traction isnt an issue with it as I only use it for FEL work and backhoe work and the backhoe weight gives it plenty of traction.
    2010 LS P-7010C 20F/20R gear tractor & FEL, 2009 Kubota B 26 TLB, RTV 900 Kubota,17 foot Lund boat with 70HP motor, 2012-20 ft 12k GVW trailer, 2011- 52" Craftsman ZTR mower, 2013 Ferris Zero Turn, 3 weed whackers, pressure washer, leaf blowers, 7 foot bush hog, 8 foot landscape rake , 8 foot 3 PH disc, 2 row cultivator, 350 amp Miller AC/DC welding machine and all the tools needed to keep them all repaired and running.

  2. #2
    Veteran Member xring100's Avatar
    Join Date
    Dec 2012
    Livingston County, Michigan
    Kubota M8540, ZD1211 60"


    What pressure does the owners manual call for my rears call for 16 psi and fronts a 24 psi max front is listed at 40 psi.



Similar Threads

  1. Rear tire flat on 2615
    By Blue_Sky in forum Mahindra Owning/Operating
    Replies: 5
    Last Post: 06-10-2012, 06:16 PM
  2. Tires flat rear tire
    By stevestud99 in forum Bobcat Tractors
    Replies: 2
    Last Post: 08-16-2011, 11:14 PM
  3. rear tire flat--advice needed
    By HCJ in forum Tires
    Replies: 18
    Last Post: 04-19-2009, 09:02 PM
  4. Chains Put chains on - right rear tire flat
    By pjwbx2230 in forum Kubota Owning/Operating
    Replies: 4
    Last Post: 12-04-2006, 08:06 PM
  5. flat rear tire on 790
    By Conservative1 in forum Tires
    Replies: 2
    Last Post: 05-16-2005, 08:57 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
© 2018 TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.