Results 1 to 3 of 3
-
01-20-2013, 03:45 PM #1Super Member
- Join Date
- Jan 2009
- Posts
- 9,133
- Location
- From Vt, in Va, retiring to MS
- Tractor
- Kubota's - B7610, M4700
New owner of an old M4700, questions on trailer size -
I just bought a M4700DT w/ FEL and need to get it home. Sunbelt rents 12', 14', and 18' trailers with a GVWR that's sufficient.
Do y'all think a 14' would handle it? I've got an 18' that I need to get inspected, but I need to pick up the tractor next week I think.My rides - '95 Kubota M4700 w/ PEC, LA1001 FEL :'07 B7610, LA352 FEL, Bush Hog SBX 48 box blade, '09 Woods BH70-X w/ 16" bucket and thumb, 3pt pallet forks, Dale Phillips PHD, Jinma 8" chipper, 2 Piranha's, Winco 12KW PTO generator, Howse plow, 5' KK tiller, 5' Big Bee cutter, with a 2002 7.3L Ford F350 CC DRW 4x4 and '07 18' Hudson HSE Deluxe trailer - 5 Ton to haul it all
My saws - 12" B&D 40 volt,JD CS 62, efco 3500, Stihls - 021, 660 w/woods mod, 660 w/ DP muffler, 088, Woodmizer LT10
-
01-20-2013, 03:58 PM #2Platinum Member
- Join Date
- Nov 2011
- Posts
- 500
- Location
- SW Missouri
- Tractor
- 2016 Kubota M7060HDC
I just measured my 5100 at about 14ft with only the loader and tractor. So I'd load it on the 18 to be safe. Especially if you have a rear implement. I tow mine on a 22ft and it fills it up quick with a rear implement.
I like to push buttons that I dont know what they do to find out. Theres some I wont push anymore
-
01-20-2013, 04:57 PM #3Super Member
- Join Date
- Jan 2009
- Posts
- 9,133
- Location
- From Vt, in Va, retiring to MS
- Tractor
- Kubota's - B7610, M4700
Re: New owner of an old M4700, questions on trailer size -
Thanks - no rear implement (I missed out on my bid for the 5' Bushog that was sold at the same time).
/edit - just spoke to Sunbelt, they only have a 14' locally.
OrangeToys - was that 14' from the back of the furthest reach of the tractor to the tip of the lowered loader?Last edited by newbury; 01-21-2013 at 08:22 AM. Reason: more info
My rides - '95 Kubota M4700 w/ PEC, LA1001 FEL :'07 B7610, LA352 FEL, Bush Hog SBX 48 box blade, '09 Woods BH70-X w/ 16" bucket and thumb, 3pt pallet forks, Dale Phillips PHD, Jinma 8" chipper, 2 Piranha's, Winco 12KW PTO generator, Howse plow, 5' KK tiller, 5' Big Bee cutter, with a 2002 7.3L Ford F350 CC DRW 4x4 and '07 18' Hudson HSE Deluxe trailer - 5 Ton to haul it all
My saws - 12" B&D 40 volt,JD CS 62, efco 3500, Stihls - 021, 660 w/woods mod, 660 w/ DP muffler, 088, Woodmizer LT10
Reply With QuoteSimilar Threads
-
New bx owner, few questions
By bigwhitehd in forum Kubota Owning/OperatingReplies: 18Last Post: 02-14-2010, 11:00 PM -
new owner questions
By Scott-62 in forum ToolcatReplies: 9Last Post: 02-20-2007, 06:25 PM -
Possible PT Owner Questions
By woodlandfarms in forum Power TracReplies: 4Last Post: 10-11-2006, 11:44 AM -
New owner questions
By ghmerrill in forum YanmarReplies: 69Last Post: 06-02-2006, 12:24 PM -
New owner questions
By hbaird in forum Chinese TractorsReplies: 1Last Post: 05-16-2005, 08:11 PM
