Results 1 to 7 of 7
  1. #1
    Elite Member
    Advertiser
    MtnViewRanch's Avatar
    Join Date
    Mar 2005
    Posts
    7,697
    Location
    4000\' mountains of Southern California
    Tractor
    Mahindra 7520, Mahindra 3215HST, Case 580 extendahoe, Case 310 dozer, Parsons trencher, Cat D6,

    Default L48 3pt linkage

    Does anyone know what L model or Grand L model would have the same 3pt hitch
    linkage as an L48?
    Brian
    Top and Tilt Kits by Fit Rite Hydraulics

  2. #2
    Gold Member
    Join Date
    Nov 2007
    Posts
    483
    Location
    PA
    Tractor
    Kubota L3130 HST 4x4

    Default Re: L48 3pt linkage

    I don't directly know the answer to your question, but I downloaded the 3-pt drawings from Messicks.com. With the P/N's in hand you can check the other L-models to see what works. Good luck!

    3-POINT LINKAGE_DRAWBAR_HITCH.pdf
    Kubota L3130 HST 4x4, FEL LA723 w/QA, Backhoe BH90, Snow Blower: L2185 72" front mount, 7' back blade, carry all, 48" Pallet Forks w/QA, Sun Shade, Turf tires & Rubber Chains for the winter, Extra forward and rear lighting. BearCat 73454 Wood Chipper. LandPride RCR2672 Rotary Cutter. Approximately 290 hours

  3. #3
    Elite Member
    Advertiser
    MtnViewRanch's Avatar
    Join Date
    Mar 2005
    Posts
    7,697
    Location
    4000\' mountains of Southern California
    Tractor
    Mahindra 7520, Mahindra 3215HST, Case 580 extendahoe, Case 310 dozer, Parsons trencher, Cat D6,

    Default Re: L48 3pt linkage

    Thanks, I ended up just getting the info off of the kubota website. The only match up is an L4300.
    Brian
    Top and Tilt Kits by Fit Rite Hydraulics

  4. #4
    Gold Member
    Join Date
    Nov 2007
    Posts
    483
    Location
    PA
    Tractor
    Kubota L3130 HST 4x4

    Default Re: L48 3pt linkage

    If you need to buy new check wholegoods price versus buying all the pieces individually. Wholegoods is typically through sales versus buying as parts... At least it use to be like this.
    Kubota L3130 HST 4x4, FEL LA723 w/QA, Backhoe BH90, Snow Blower: L2185 72" front mount, 7' back blade, carry all, 48" Pallet Forks w/QA, Sun Shade, Turf tires & Rubber Chains for the winter, Extra forward and rear lighting. BearCat 73454 Wood Chipper. LandPride RCR2672 Rotary Cutter. Approximately 290 hours

  5. #5
    Elite Member
    Advertiser
    MtnViewRanch's Avatar
    Join Date
    Mar 2005
    Posts
    7,697
    Location
    4000\' mountains of Southern California
    Tractor
    Mahindra 7520, Mahindra 3215HST, Case 580 extendahoe, Case 310 dozer, Parsons trencher, Cat D6,

    Default Re: L48 3pt linkage

    Quote Originally Posted by moship View Post
    If you need to buy new check wholegoods price versus buying all the pieces individually. Wholegoods is typically through sales versus buying as parts... At least it use to be like this.
    Actually just checking to see if I already had the measurements to build a hydraulic side link for a customer. Not looking to purchase anything.

    Thanks though.
    Brian
    Top and Tilt Kits by Fit Rite Hydraulics

  6. #6
    Gold Member
    Join Date
    Feb 2005
    Posts
    458
    Location
    Southern NH
    Tractor
    2 L48s, KX121-3, RTV 1100 and a couple of older Fords

    Default Re: L48 3pt linkage

    I doubt the 4300 would match up. I have 2 L48s, the linkage uses a clevis pin to mount to the frame, which a 4300 does not have. Also, the arms are very thick, thicker than what I would expect on a non-industrial tractor. The hitch kits is ridiculously expensive if you have to buy after the fact. Good luck.

  7. #7
    Elite Member
    Advertiser
    MtnViewRanch's Avatar
    Join Date
    Mar 2005
    Posts
    7,697
    Location
    4000\' mountains of Southern California
    Tractor
    Mahindra 7520, Mahindra 3215HST, Case 580 extendahoe, Case 310 dozer, Parsons trencher, Cat D6,

    Default Re: L48 3pt linkage

    Quote Originally Posted by curtisfarmer View Post
    I doubt the 4300 would match up. I have 2 L48s, the linkage uses a clevis pin to mount to the frame, which a 4300 does not have. Also, the arms are very thick, thicker than what I would expect on a non-industrial tractor. The hitch kits is ridiculously expensive if you have to buy after the fact. Good luck.
    Not that it has ended up mattering, but according to kubota, they use the same side link, part #32771-71540. That fits an L4300DT, an L4300F and an L48. That is straight off of the Kubota website.
    Brian
    Top and Tilt Kits by Fit Rite Hydraulics

Similar Threads

  1. 3pt Linkage easy hitch frame
    By OzGrasshopper in forum Attachments
    Replies: 6
    Last Post: 12-28-2010, 11:51 AM
  2. L48
    By ecoslik in forum Kubota Owning/Operating
    Replies: 9
    Last Post: 06-11-2010, 10:33 PM
  3. Replies: 3
    Last Post: 08-16-2008, 12:28 AM
  4. 3pt bachhoe or go with a L48 or the M59?
    By tnpete in forum Kubota Owning/Operating
    Replies: 5
    Last Post: 07-15-2008, 09:43 AM
  5. L48
    By foz in forum Kubota Owning/Operating
    Replies: 6
    Last Post: 04-13-2001, 12:40 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.