Page 1 of 3 123 LastLast
Results 1 to 10 of 22
  1. #1
    New Member
    Join Date
    Mar 2013
    Posts
    2
    Location
    sellersville, pa
    Tractor
    Kubota BX2200

    Default BX2200 Wont Start, New Battery, fule pump runs and starter clicks

    I have a BX2200 that was having issues turning over and starting. I replaced the battery and still have same issue. Can hear the fuel pump going and the starter tryes to turn the engine over but just makes a loud clicking noise. Is the starter bad? Seloniod? Help please

  2. #2
    Elite Member 4shorts's Avatar
    Join Date
    Jul 2008
    Posts
    3,215
    Location
    Bay Roberts, Newfoundland
    Tractor
    Kubota 5740,BX25D

    Default Re: BX2200 Wont Start, New Battery, fule pump runs and starter clicks

    I've replaced two or three starters on those machines because of the solonoids. You hit the key to start and all you get is a "click". A quick test is keep your key in the crank position and tap on the starter with a small hammer. If it starts to crank (I suspect it will) then its the starter. Rather than just replacing the solonoid I replaced the starter because of the low cost.
    Hope this helps and welcome to the site
    ...Excellence is not a skill. It is an attitude...

    Visit us on the web @ www.specialtyrepairs.ca

    YouTube Video's: http://www.youtube.com/user/7863348?feature=guide

    2011 Kubota 5740/854 FEL/L2674 Blower/Artic Angle blade with 3rd function set up,Rain Tracker Wiper system, custom built vertical exhaust,Grammer Air Ride Seat and other custom stuff
    2013 Kubota BX25D with many mods
    Kubota ZTR ZG 222 Z
    Custom Toyota Fork Lift

  3. #3
    Platinum Member
    Join Date
    Nov 2008
    Posts
    849
    Location
    Brampton, On\lot Powassan, ON Canada
    Tractor
    Kubota B4200\MF 135\Kubota B3200

    Default Re: BX2200 Wont Start, New Battery, fule pump runs and starter clicks

    You say the starter tries to turn the engine over, is that because you see a little movement in the fan blade or does it do like a 1/2 rotation? Was the new battery charged, have you tried boosting with your car\truck? Clicking starter Solenoid ususally relates to a week battery. If battery is good then...

    I would do some gentle tapping on the starter with a small hammer and then try and start it, you may have some brushes seized or warn down too much.

    How many hours on the tractor?
    Unimogdave

  4. #4
    Platinum Member
    Join Date
    Nov 2008
    Posts
    849
    Location
    Brampton, On\lot Powassan, ON Canada
    Tractor
    Kubota B4200\MF 135\Kubota B3200

    Default Re: BX2200 Wont Start, New Battery, fule pump runs and starter clicks

    4 shorts types faster then me!
    Unimogdave

  5. #5
    Veteran Member NY_Yankees_Fan's Avatar
    Join Date
    Mar 2002
    Posts
    2,190
    Location
    Warren County, NJ (60 miles from NYC)
    Tractor
    Kubota BX 2200

    Default

    Quote Originally Posted by jduderdad View Post
    I have a BX2200 that was having issues turning over and starting. I replaced the battery and still have same issue. Can hear the fuel pump going and the starter tryes to turn the engine over but just makes a loud clicking noise. Is the starter bad? Seloniod? Help please
    The problem you have is a safety switch is not activating. Try moving the PTO lever if not all of them and turning the key at the same time. I have the exact same problem. Just have not had the time to take the tire off and see what the problem is. It is a simple fix. Good luck and welcome to TBN

    Sent from my iPhone using TractorByNet
    AKA Tom
    #28 World Series Champions for the Yankees in 2014
    Kubota BX 2200, FEL, 60" MMM with Gator Blades, 48" Kioti Aerator, M96 Herd Seeder, W.R. Long Tooth Bar, 48" First Choice Tiller, Kubota BX 2750 Front Snowblower, Sims Cab, MacKissic Chipper TPH 122, Carry All, Canopy, and Weight Box

  6. #6
    Super Member radioman's Avatar
    Join Date
    May 2008
    Posts
    5,739
    Location
    Ontario, NY
    Tractor
    Kubota BX24

    Default Re: BX2200 Wont Start, New Battery, fule pump runs and starter clicks

    I fall in the yankees camp of levers first. Its the easiest and free thing to check. 4shorts also makes a good point on solenoid as cars do the same thing. Just need to do a little more troubleshooting instead of part swapping and hoping.

  7. #7
    Elite Member gwdixon's Avatar
    Join Date
    Jul 2009
    Posts
    2,956
    Location
    Northern CA

    Default Re: BX2200 Wont Start, New Battery, fule pump runs and starter clicks

    As others have said, safety switches are all over the BX2200.

    Try jiggling all of the levers one at a time and then try starting after each lever is bumped.

    You likely know this but make sure it is in neutral, both PTOs are disengaged, sit on the seat, put on the brake, and generally shut down ever possible function except the start key.
    2009 Kubota M7040, R1s, LA1153 FEL, fork lift, 3 rear remotes, T&T
    2002 Kubota L48 TLB, 12", 18", 24" HD buckets
    2001 Kubota BX2200, Turf, LA211 FEL
    7.5' Howse 3PT disc, 88" Gearmore 4G4 box scraper, 4' box scraper, Gearmore GB85 blade, LandPride RCR2596 cutter, 6', 4' flail mowers, 6', 4' rototiller, 4' Bush Hog cutter, HD subsoiler, Bearcat 70554 chipper, Bush Hog PHD w/ 12", 6" augers, Ford 101 3-bottom plow, 8' land leveler, 6' rake, lots of misc.

  8. #8
    Silver Member
    Join Date
    Mar 2005
    Posts
    211
    Location
    x
    Tractor
    x

    Default Re: BX2200 Wont Start, New Battery, fule pump runs and starter clicks

    If your solenoid clicks when the key is turned to the crank position, the safety switches are OK. With a safety switch out of position, there will be no power to the solenoid, and no click.
    First, make sure that the starter and battery connections are clean and tight. With a voltmeter, take a voltage reading at the starter while attempting to crank. Cranking voltage should be above 9.6 volts. If the voltage measures 12 volts and all you get is the click, the starter is bad.
    In most cases, a starter that won't run will need the brushes replaced. This is much cheaper than replacing the starter.

  9. #9
    Elite Member 4shorts's Avatar
    Join Date
    Jul 2008
    Posts
    3,215
    Location
    Bay Roberts, Newfoundland
    Tractor
    Kubota 5740,BX25D

    Default Re: BX2200 Wont Start, New Battery, fule pump runs and starter clicks

    Quote Originally Posted by ibnxe View Post
    In most cases, a starter that won't run will need the brushes replaced. This is much cheaper than replacing the starter.
    I don't see it that way. I replaced the starter on the last two that I did. The new starter cost $120. With a 3 year warranty. If you just replace the brushes now or the solonoid who's to say another part won't go in a month or so.
    My thought are IF you have to remove the starter at all, shove a new one in and be done with it.
    Just my worth.
    ...Excellence is not a skill. It is an attitude...

    Visit us on the web @ www.specialtyrepairs.ca

    YouTube Video's: http://www.youtube.com/user/7863348?feature=guide

    2011 Kubota 5740/854 FEL/L2674 Blower/Artic Angle blade with 3rd function set up,Rain Tracker Wiper system, custom built vertical exhaust,Grammer Air Ride Seat and other custom stuff
    2013 Kubota BX25D with many mods
    Kubota ZTR ZG 222 Z
    Custom Toyota Fork Lift

  10. #10
    Silver Member
    Join Date
    Mar 2005
    Posts
    211
    Location
    x
    Tractor
    x

    Default Re: BX2200 Wont Start, New Battery, fule pump runs and starter clicks

    I guess I'm from the old school. I almost always disassemble failed components to see what went wrong... and repair, if it is something simple.

Page 1 of 3 123 LastLast

Similar Threads

  1. Replies: 7
    Last Post: 05-25-2013, 03:51 PM
  2. Replies: 14
    Last Post: 09-26-2012, 06:43 PM
  3. Kubota BX2200 engine runs only when starter operates
    By jjflash0109 in forum Parts/Repairs
    Replies: 4
    Last Post: 04-20-2012, 04:26 PM
  4. kubota bx2200 wont start
    By gerry w in forum Kubota Owning/Operating
    Replies: 12
    Last Post: 07-28-2011, 04:42 PM
  5. 4110 wont start just rapid clicks
    By roermo in forum John Deere Owning/Operating
    Replies: 21
    Last Post: 12-16-2008, 03:53 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2016 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.