need to tap into power beyond port on a L5240

[Dixie B6000]

Need some help guys. Putting a third function kit on my 5240 and not sure what or if any fitting adapter will work in that banjo type port. If some of you with a WR Long true third function kit have it on your l40 series tractors with a LA854 loader can you take a peek and see what kinda fitting they are using? Pics would be great too thanks in advance

 

[J_J]

Can you not use the PB port off of the hyd block to add the 3ed function, and then direct the fluid to the 3pt?

 

[Dixie B6000]

The one on top of the 3pt?

 

[Dixie B6000]

JJ the banjo fitting i'm referring to is the power beyond i do believe. Its comes off the loader valve and goes up to the 3point area. It is labeled "BY" on the valve. I could be wrong on this though

 

[J_J]

I don't know of a banjo type adapter.

You could cut the metal line and use

Flareless Compression Tube Fittings > Discount Hydraulic Hose.com

 

[Dixie B6000]

I think i might have a fitting that will work! Will find out in the morning

 

[Dixie B6000]

JJ I'm not real sure about those fittings. They're a good thought but have a tendency to fail in high vibration areas. My tractor vibrates but not sure if its enough to cause them to fail. Rather use something more suited for my application.

 

[J_J]

This is the statement on the fittings page.

http://www.discounthydraulichose.com/Flareless_Compression_Hydraulic_Tube_Fittings_s/51.htm

Typical applications: hydraulic service, instrumentation and chemical processing. Highly recommended for high pressure and high vibration applications.

Are you talking about splicing into the flow path and insert the 3ed function.

What is your intended use?

 

[Dixie B6000]

This site says different.
http://www.hoseandfittingsetc.com/technical-info/ferulok/

I'm not tapping into the pressure port of my loader valve. Its the power beyond port that runs strait to my 3pt. Yes I'm running a 3rd function for a grapple