spitracer1296
New member
- Joined
- Oct 17, 2008
- Messages
- 6
After letting my wife use my B2620 (I know 1st mistake) Ijumped on it to mow the lawn. The first think I find is the 3pt will not raise the arms so the deck won't come up!
I have never had an issue with the tractor and it has around 300 hours on it. If you grab the arms they can be lifted with very little effort (just their own weight) and fall to the bottom position when released with no resistance.
I checked the fluid, little low but well within the marks....topped it off.
I checked the valve under the seat thinking she might have turned it off....no dice! turning it full on and anywhere else does not make a difference.
I looked to see if the linkage had come unconnected, all appears OK.
I hooked up the bucket to see if maybe the hydraulic filter was clogged, bucket raises and lowers with no issue.
At this point I don't know what to do other than take it to the dealer $$$$$$
Could really use some help on this.
Thanks
Chris
I have never had an issue with the tractor and it has around 300 hours on it. If you grab the arms they can be lifted with very little effort (just their own weight) and fall to the bottom position when released with no resistance.
I checked the fluid, little low but well within the marks....topped it off.
I checked the valve under the seat thinking she might have turned it off....no dice! turning it full on and anywhere else does not make a difference.
I looked to see if the linkage had come unconnected, all appears OK.
I hooked up the bucket to see if maybe the hydraulic filter was clogged, bucket raises and lowers with no issue.
At this point I don't know what to do other than take it to the dealer $$$$$$
Could really use some help on this.
Thanks
Chris