Results 1 to 3 of 3
  1. #1

    Join Date
    Jun 2003
    Posts
    8
    Location
    Decatur IN
    Tractor
    Kubota BX2200

    Default Front mount snowblower

    I found a 50 inch kubota snowblower, model number 2650. Does anybody know if that will fit on my BX2200? Thanks.

  2. #2
    Super Member
    Join Date
    Apr 2000
    Posts
    6,220
    Location
    central New York
    Tractor
    all makes and models

    Default Re: Front mount snowblower

    It could with the right subframes but it is about 40 lbs heavier then the one from the factory. [img]/forums/images/graemlins/shocked.gif[/img] That unit normally fits the standard B-series. [img]/forums/images/graemlins/blush.gif[/img]

  3. #3
    Platinum Member
    Join Date
    Mar 2003
    Posts
    926
    Location
    Maine
    Tractor
    Kubota B2620

    Default Re: Front mount snowblower

    I have a 2200 that has a BX2750 snowblower. The blower mounts to the front end via a qucik connect system that has three main components. The quick mount connects to the front end of the tractor as well as has the hydraulic cylinder to raise and lower the blower. There is a drive shaft that then connects the mid pto with the front quick connect. The blower has a shaft that then connects to the quick mount. Looks a bit Rube Goldberg but works great!
    I don't think weight is a problem as much as getting the power to the blower and being able to raise and lower it. Don't forget to look how you are going to rotate the shoot . Mine has a manual crank that runs very close to my fourway valve. ( you'll need to use the FEL valve to power the raising and lowering of the unit)
    Confused?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.