LD1
Epic Contributor
As promised, a new thread detailing the 3 remotes and TNT build.
Here are the parts used. For most of the fittings and adapters and hoses, I'll quote DHH or Surplus center prices, allthough I didnt need to order any from them. I had most of what I needed already, and what I didnt have, I ordered through work. So the hoses and fittings prices are just so others can compare and see what is needed for the total project. And may not match up to exactally what I did, because I was working with what I had. IE: I didnt have a -10 ORB x -08 JIC 90* fitting, but I did have a -10 ORB x -10 JIC 90* as well as a -10 x -08 JIC reducer. But if I had NOTHING at all, what I would have ordered is what is listed.
Master parts list for 3-remote install:
Chief 3-spool valve with 1 spool float. Baileys # 220959 .....................$185
Chief PB plug for above valve.............Baileys # 220915......................$20
(6) Pairs of pioneer 4200-4 couplings......Napa # BK VP42004 $20ea.....$120
72" of 1/2" hose to go from loader PB to remote P....surpluscenter # 940-2272......$21.95
Hose to go from remote valve PB back to tractors manifold.....reused the hose that originally went from the loader valve PB to the manifold..........FREE
36" of 1/2" Hose to go from remote valve tank port back to tractor manifold Surplus center #..... 940-2236........$16
(6) 3/8" hoses 24" long to go from remote valve to couplers....surplus center #...930-2224...$10.95ea...$65.70
(3) Adapters to make the 1/2" hoses attach to the valve -10orb x -08JIC 90*..DHH # 6801-10-08..$3.34ea...$10.02
-08 JIC tee to tee in the return line at tractors manifold block.....DHH #2603-08-08-08.......$2.87
3/8" NPT male x -08 JIC female swivel to attach above tee to manifold on tractor......DHH #6505-06-08.......$4.05
(6) -08 ORB x -06 JIC adapters to connect hoses for couplers at the valve....DHH # 6400-06-08......$1.54ea.......$9.24
(6) 1/2" NPT x -06 JIC 45* adapters to attach the quick couplers ...DHH # 2503-06-08.....$3.12ea........$18.72
(6) QC caps....................$1.90 ea..........$11.40
Bracket to mount the valve.......made with scraps......FREE
Block to clamp-mount the couplers.....Made in house......FREE
TOTAL $484.95
Satisfaction of doing it myself......priceless.....or at least the ~$2k I saved over OEM.
Now for the TNT parts list:
3" x 6" Maxim cylinder......bailey # 288427.......................................................................................$125
3" x 12" Maxim cylinder.....bailey #288431.....................................................................................$140
(2) Category II ball ends......Agrisupply #11914.......................................$3.99ea..................................$7.98
Category I ball end (for sidelink) Agrisupply #11913.......................................................................$3.99
(2) 36" 3/8" hoses.........surplus center # 930-2236...................................$12.95ea.............................$25.90
(2) 30" 3/8" hoses.........surplus center # 930-2230................................$11.95ea...............................$23.90
(3) -08 orb x -06 JIC to adapt cylinders to hoses.......DHH # 6400-06-08.......$1.54ea.......................$4.62
-08 orb x -06 JIC 90* to adapt cylinder to hose.........DHH #6801-06-08............................................$2.55
(4) 1/2" NPT male x -06 JIC to adapt male half of coupler to hose....DHH #2404-06-08....$1.01ea.....$4.04
(4) dust caps...........................................................................................$1.90ea.......................$7.60
TOTAL $345.58
Shipping for ALL of above including the remote stuff.....$42.26
Grand total for 3 remotes AND TNT setup.....$872.79
Now....on to the build details and pics.....I will politely ask if everyone waits till I get through everything before posting. Details will come in a series of replys to this thread, as to not have everything in one single post.
Here are the parts used. For most of the fittings and adapters and hoses, I'll quote DHH or Surplus center prices, allthough I didnt need to order any from them. I had most of what I needed already, and what I didnt have, I ordered through work. So the hoses and fittings prices are just so others can compare and see what is needed for the total project. And may not match up to exactally what I did, because I was working with what I had. IE: I didnt have a -10 ORB x -08 JIC 90* fitting, but I did have a -10 ORB x -10 JIC 90* as well as a -10 x -08 JIC reducer. But if I had NOTHING at all, what I would have ordered is what is listed.
Master parts list for 3-remote install:
Chief 3-spool valve with 1 spool float. Baileys # 220959 .....................$185
Chief PB plug for above valve.............Baileys # 220915......................$20
(6) Pairs of pioneer 4200-4 couplings......Napa # BK VP42004 $20ea.....$120
72" of 1/2" hose to go from loader PB to remote P....surpluscenter # 940-2272......$21.95
Hose to go from remote valve PB back to tractors manifold.....reused the hose that originally went from the loader valve PB to the manifold..........FREE
36" of 1/2" Hose to go from remote valve tank port back to tractor manifold Surplus center #..... 940-2236........$16
(6) 3/8" hoses 24" long to go from remote valve to couplers....surplus center #...930-2224...$10.95ea...$65.70
(3) Adapters to make the 1/2" hoses attach to the valve -10orb x -08JIC 90*..DHH # 6801-10-08..$3.34ea...$10.02
-08 JIC tee to tee in the return line at tractors manifold block.....DHH #2603-08-08-08.......$2.87
3/8" NPT male x -08 JIC female swivel to attach above tee to manifold on tractor......DHH #6505-06-08.......$4.05
(6) -08 ORB x -06 JIC adapters to connect hoses for couplers at the valve....DHH # 6400-06-08......$1.54ea.......$9.24
(6) 1/2" NPT x -06 JIC 45* adapters to attach the quick couplers ...DHH # 2503-06-08.....$3.12ea........$18.72
(6) QC caps....................$1.90 ea..........$11.40
Bracket to mount the valve.......made with scraps......FREE
Block to clamp-mount the couplers.....Made in house......FREE
TOTAL $484.95
Satisfaction of doing it myself......priceless.....or at least the ~$2k I saved over OEM.
Now for the TNT parts list:
3" x 6" Maxim cylinder......bailey # 288427.......................................................................................$125
3" x 12" Maxim cylinder.....bailey #288431.....................................................................................$140
(2) Category II ball ends......Agrisupply #11914.......................................$3.99ea..................................$7.98
Category I ball end (for sidelink) Agrisupply #11913.......................................................................$3.99
(2) 36" 3/8" hoses.........surplus center # 930-2236...................................$12.95ea.............................$25.90
(2) 30" 3/8" hoses.........surplus center # 930-2230................................$11.95ea...............................$23.90
(3) -08 orb x -06 JIC to adapt cylinders to hoses.......DHH # 6400-06-08.......$1.54ea.......................$4.62
-08 orb x -06 JIC 90* to adapt cylinder to hose.........DHH #6801-06-08............................................$2.55
(4) 1/2" NPT male x -06 JIC to adapt male half of coupler to hose....DHH #2404-06-08....$1.01ea.....$4.04
(4) dust caps...........................................................................................$1.90ea.......................$7.60
TOTAL $345.58
Shipping for ALL of above including the remote stuff.....$42.26
Grand total for 3 remotes AND TNT setup.....$872.79
Now....on to the build details and pics.....I will politely ask if everyone waits till I get through everything before posting. Details will come in a series of replys to this thread, as to not have everything in one single post.
Last edited: