ahenthus
New member
I searched high and low (on the forum) for the correct filters for my HST/Hyd filters. I thought I had it nailed but things did not work out. Kubota Parts shows the two filters to be: hh660-36060 and hh670-37710. NAPA crosses to 1361 and 1551. I purchased the two NAPA Gold filters but they turned out to be the wrong size. The two filters on my tractor are original. The one on the right side is 4.5"X3" and the left side is 4"X3". The Napa 1361 is 3.75"X3" and the 1551 is 5"X3.5". I haven't removed the originals so I can't tell whether the threads and seals match up but the larger NAPA filter (1551) doesn't look like it'll fit due to it's larger diameter. I don't have a Kubota dealer nearby but I have complete confidence in the NAPA filters as long as they will fit. On my NAPA invoice the 1361 (the smaller one) is listed as an oil filter and the 1551 is listed as a hyd filter. Does anyone have any advice? I actually thought the filters would be the easiest thing about this project because my forum search had been mainly to determine which drain plugs needed to be opened and all else related to the Hyd oil change. The Operator's manual is not the most complete or helpful.
Thanks,
Claude
Thanks,
Claude