Part number for BX2200 60" deck anti-scap wheel pins?

[Jay4200]

I'm having a hard time finding the part numbers for the pins that are used to attach and adjust the height of the 4 anti-scalp wheels that are on the outside edges of my BX's 60" deck. Anybody have that info? Thx.

 

[ovrszd]

Hopefully I attached this link correctly. Looks like illustration # 30. Part # K52221-72670.

http://kpadweb.kubota.co.jp/kpad2/PartsInfo.do?bookCd=100K1086&funcCd=172&figNo=A10300&dispType=2

 

[aczlan]

I use a 5/16" bolt with a nylock nut on our BX2660, they dont snag and get pulled out like a clip does.
Before that, I used a 5/16" 'Lock pin' (like this: CountyLine Lock Pin, Round, 5/16 in. x 1-3/4 in. at Tractor Supply Co. ).

Aaron Z

 

[David_Kb7uns]

Here you go

Kubota: BOLT, SHOULDER (, Part # K5221-72672

David

 

[anthonyv]

The way I am reading this, these are the parts you want.

Kubota: PIN, CLEVIS, Part # 75599-51235

Kubota: RING, SNAP, Part # K3111-7274

 

[ovrszd]

Very possibly. I might have misinterpreted what he needs.

 

[Leejohn]

Go here. Index of Kubotabooks/Mowers/

 

[ovrszd]

Leejohn, good stuff right there!!!! Thank you very much for the link!!!

 

[Jay4200]

It's the clevis pins I need. There are 'lock pins' of some type on there now, except for the one that failed when the wheel assembly fell out of the deck. Thanks doods.

 

[diesel85]

I used to use the clevis pins with the cotter pins until one day I almost mowed over one of the gauge wheels.

I then switched to a bolt with a nylon locked wing nut on all of them. It's been working great for years now.