I'm long time lurker.
Please let me know if there's anything wrong with this idea.
I've been trying to make the snowthrower chute rotate using the La682 loader L2205 valve
I plumbed the fel roll cylinder in series with the hydraulic motor
The chute rotates perfectly while the roll cylinders moved in/out about 2-3" inches (didn't measure)
Look like I could mount a short cylinder onto the blower
(cyl should match fel roll cyl in bore dia and rod size,with 10-12" stroke) and plumb it up.
I do not understand how this works.(or 3 way valves?)
Other then more fluid goes into the base of the cyl
and lesser amount goes to the hydraulic motor because of the rod diameter.
tia,rod
Please let me know if there's anything wrong with this idea.
I've been trying to make the snowthrower chute rotate using the La682 loader L2205 valve
I plumbed the fel roll cylinder in series with the hydraulic motor
The chute rotates perfectly while the roll cylinders moved in/out about 2-3" inches (didn't measure)
Look like I could mount a short cylinder onto the blower
(cyl should match fel roll cyl in bore dia and rod size,with 10-12" stroke) and plumb it up.
I do not understand how this works.(or 3 way valves?)
Other then more fluid goes into the base of the cyl
and lesser amount goes to the hydraulic motor because of the rod diameter.
tia,rod