It appears to have worked? The outlets use prince SV series stack valve with power beyond. Plumed from the front 4 way to the SV and then back to the tractor. Not hard once I figured out where to put the valve. I did have help mounting it and fitting the hose. Originally I intended to put it outside the rops horizontally but then decided on the vertical mounting. The levers are not as handy as I would like but it works out ok. I did have to modifi the levers a bit. The bottom spool is a detent valve I intend for hyd motor use I have not yet decided weather or not to modifi that lever. Used pioneer 8010 couplers so I could interchange with ag tractors. Worked out good and it will see alot of use. I have a little trim work to do with it yet and some paint. Thanks Madreferee for all the help.