newcountry
Silver Member
I removed my loader for the first time recently with no problems and locked my joystick controller. Yesterday I tried to reinstall it with some minor issues which I think I can figure out on my own, but I noticed that after unlocking the controller the stick is floppy front to back (raising and lowering the boom). Side-to-side works and has resistance, but front to back there is no resistance whatsoever. In fact the stick rests not in the neutral position but all the way in the back position.
I called my dealer who told me to switch the hydraulic lines around and see if I've got them lined up wrong and call him on monday. To me that sounded like "Go away I'm getting ready to close". But I will do what he suggested, even though I know I had them connected properly (did it twice yesterday).
Any ideas? It's under warranty so I have no issues about making them coming and fixing it, but curious if this is an easy fix maybe I'd just do it myself to get up and running.
I called my dealer who told me to switch the hydraulic lines around and see if I've got them lined up wrong and call him on monday. To me that sounded like "Go away I'm getting ready to close". But I will do what he suggested, even though I know I had them connected properly (did it twice yesterday).
Any ideas? It's under warranty so I have no issues about making them coming and fixing it, but curious if this is an easy fix maybe I'd just do it myself to get up and running.