Results 1 to 5 of 5
  1. #1
    Bronze Member
    Join Date
    Jul 2001
    Posts
    64
    Location
    Henley Brook, Westen Australia
    Tractor
    Kubota L35

    Default wiring diagram needed for an L35

    Has anybody got a wiring diagram for a kubota L35 ? I've got 6 loose wires coming out at the left-hand rear just under the seat, they look as if they should be there, they are in two clusters one of two wires both female one red and the other blue with a brown stripe. And the other one of four wires, one male black and three female one white with green stripe, one yellow with red stripe and one grey. I want to connect up an electric pump (12v) and would like to know which wires to use ?
    any help would be appreciated.

    Chris


  2. #2
    Veteran Member
    Join Date
    Sep 2000
    Posts
    1,371

    Default Re: wiring diagram needed for an L35

    Chris,

    I looked at the wire diagrams for my B21 expecting them to be similar to your L35.
    I could not identify any of the color combinations on your list to equipment that might be located at the rear of the tractor, like tail lights, work lights or hazard lights. I also looked at the color coding on the safety switches, still no matches.

    Are you perhaps a member of the 1 in 4 men that have color vision problems? [img]/w3tcompact/icons/wink.gif[/img]

    You might consider wiring your pump to the work light circuit if you don't have work lights, it is protected by a 15 amp fuse on my tractor and is easily located at the fuse block or at or near the base of the ROPS. On my tractor the wires at the base of the ROPS for work lights are coded Black, and Blue/red. These wires are only sized for 54 Watts of connected load.

    Al


  3. #3
    New Member
    Join Date
    Apr 2001
    Posts
    17
    Location
    SF Bay Area, CA, USA
    Tractor
    Kubota L35 & F3060

    Default Re: wiring diagram needed for an L35

    I also have an L35 and I believe the "extra" wires and connectors are for the work lights. Check it out when you turn on the light switch to see if it has power.

    -dave m


  4. #4
    Elite Member rbargeron's Avatar
    Join Date
    May 2000
    Posts
    2,541
    Location
    MA
    Tractor
    L5450, L48, L3250, L345

    Default Re: wiring diagram needed for an L35

    work light circuit is powered when the key is on, light switch can be off.


  5. #5

    Default Re: wiring diagram needed for an L35

    chris i have a l245dt and i have a wiring dirgram for it if you need a copy email me @ bky01@yahoo.com


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.