Botaman,
Looks like L3130 is mounting a blade on the QA. So the loader still occupies all the functions of the loader valve with his intended setup. There have been several posts here with guys that have done this with electric solenoids working off the existing loader controls as I recall. A search may locate that info..
I had a factory rear remote added and then had that plumbed from the back of the tractor to the front. If L3130 does that, he needs quick disconnects at the loader mount area too. I made that mistake and can't drop my loader without pulling those lines out, which is something I won't do. That will get resolved one day soon.
L3130,
IMO you would be better off getting the plow mounted directly to the tractor as Botaman was supposing you were. Then those loader controls would free up as he noted. I'm almost certain Kubota has a frame mount front blade. The loader mount blades your considering put a lotta lateral pressure on the loader arms when a big snow hits. With the frame mount the whole operation is not nearly as awkward and has to be stronger. That loader mounted blade is a mile out front too. I looked at that option and then dropped the idea. Still don't have a frame mount though. My green garden tractor and the rear blade on the Kubota do well enough anyhow. Still, it's nice to have a third circuit on the loader. I'm thinking grapple. /forums/images/graemlins/smile.gif
HTH