Results 1 to 7 of 7
  1. #1

    Join Date
    Apr 2005
    Posts
    6
    Location
    southwest Michigan
    Tractor
    BX 2200

    Default BX 2200 Main Fuse

    After great running for 100 hours (used BX 2200 purchased with 192 hours on it), it suddenly would not start, no current to switch. I isolated the main fuse which had blown, replaced it and on my way... question is what should I be looking for that would have possibly blown it in the first place? Just using the FEL normally, the only attachment.

    thanks

  2. #2
    Veteran Member Volfandt's Avatar
    Join Date
    Sep 2004
    Posts
    1,879
    Location
    TN
    Tractor
    2004 Kubota BX23, 1966 WheelHorse 856

    Default Re: BX 2200 Main Fuse

    Some folks will wire in additional lights to whatever "hot" circuit they find. If you have additional lights, this would be a good place to check.

    You may also want to make sure the electrical wireing and connectors going down to the fuel pump are good & tight and not pinched anywhere near a moving part such as the lift arms and/or pedal linkages.

    Sometimes a fuse will just blow over time, but I'd check everything out in the circuit to be safe & sure.

    Volfandt

  3. #3

    Join Date
    Apr 2005
    Posts
    6
    Location
    southwest Michigan
    Tractor
    BX 2200

    Default Re: BX 2200 Main Fuse

    thanks for you quick response, multiple fuses blowing now especially when shifting to neutral......will test the circuit.
    thanks

  4. #4
    Silver Member 149owner's Avatar
    Join Date
    Apr 2002
    Posts
    159
    Location
    MA
    Tractor
    Cub Cadet 149, Kubota BX2200

    Default Re: BX 2200 Main Fuse

    TractorSmart sent me a free schematic for my BX2200 so give them a try. I had two problems. The first was the fuel sender unit would short out when I filled the tank so replaced it with the upgraded one. The second was a pinched taillight wire between the rollbar and the mounting bracket.
    Attached Images Attached Images

  5. #5

    Join Date
    Apr 2005
    Posts
    6
    Location
    southwest Michigan
    Tractor
    BX 2200

    Default Re: BX 2200 Main Fuse

    I'll go for the schematic....the last try before the fuse blew, I was able to run the fuel pump on the starter switch, but as I tried to engage the starter it blew.....so I will check out the solenoid and the starter circuit next...thanks

  6. #6
    Platinum Member
    Join Date
    Mar 2005
    Posts
    700
    Location
    Palmyra WI
    Tractor
    BX2230

    Default Re: BX 2200 Main Fuse

    My experience is these things are usually a pinch point or a rub spot. Look over the harnesses for these problems.

  7. #7
    Silver Member 149owner's Avatar
    Join Date
    Apr 2002
    Posts
    159
    Location
    MA
    Tractor
    Cub Cadet 149, Kubota BX2200

    Default Re: BX 2200 Main Fuse

    I've attached the wiring diagram for the BX1800/2200
    Attached Files Attached Files

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.