Hello all - I am a new owner of a B7510. I had a local guy over to do the 50 hr service and I noticed the Super UDT fluid level as indicated by the yellow dipstick seems to be way over the high level (although it is difficult to see very well). The interesting thing is that the spec chart in the manual calls for 4.04 gal., and from a 5 gal. container there seems to be at least two gallons left. My questions is this - should I leak some UDT back out of the system to have the level fall within the low - high mark on the dipstick, or will it be OK (I remember the tech helping me said that a little makes a big difference on the dip stick). I just want to make sure that the fluid won't heat up, expand and crack a seal somewhere in the transmission. Thanks - please feel free to e-mail me with any advice.