Results 1 to 4 of 4
  1. #1
    Bronze Member
    Join Date
    Oct 2002
    Posts
    56
    Location
    Nashville Tn
    Tractor
    2006 B7610hst

    Default Hydraulic cylinder seal

    I noticed today while using the loader on theb7610 the seal ,O-ring had came off the end of cylinder.Can it be pressed back in to the cylinder?I don't want to tear it up or damage anything,also hate to have to run it to a dealer for something simple.
    Thanks tony3542

  2. #2
    Platinum Member
    Join Date
    Feb 2005
    Posts
    626
    Location
    Southern Indiana
    Tractor
    BX23

    Default Re: Hydraulic cylinder seal

    Cut the oring off and discard it. Those orings are installed on the cylinders to keep the paint out of the cylinder seal. Once painted, they serve no purpose.

  3. #3
    Member
    Join Date
    May 2006
    Posts
    44
    Location
    Peyton, CO
    Tractor
    Kubota L3400

    Default Re: Hydraulic cylinder seal

    Quote Originally Posted by 638
    Cut the oring off and discard it. Those orings are installed on the cylinders to keep the paint out of the cylinder seal. Once painted, they serve no purpose.
    Wow! I had the same issue on the FEL on my L3400. I was all worried about it. I love this forum. Thanks for the info.

    Terry

  4. #4
    Bronze Member
    Join Date
    Oct 2002
    Posts
    56
    Location
    Nashville Tn
    Tractor
    2006 B7610hst

    Default Re: Hydraulic cylinder seal

    YEA,thanks 638.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.