Results 1 to 4 of 4
  1. #1
    Platinum Member
    Join Date
    Apr 2005
    Posts
    773
    Location
    East Ohio
    Tractor
    Kubota L2800HST

    Default FEL float postion. FEL removal.

    I just bougt a L2800 HST. I've been reading the manual on the loader. How do I get it to go to the float position? In the manual, the joystick is all the way forward, but when I do that, it just lifts the tractor off the ground.

    Also, anyone have any pointers on FEL loader removal. I'm going to follow the manual, but I thought you guys might have some tricks up your sleeves.
    Its the LA463.

    Thanks.

  2. #2
    Platinum Member fishpick's Avatar
    Join Date
    May 2006
    Posts
    701
    Location
    The part of NY with high taxes
    Tractor
    NH TC45DA & Kubota BX24

    Default Re: FEL float postion. FEL removal.

    I had the same experience with the float position... all the way forward just keeps lifting... until you push it even farther forward - like - you are gonna break it... it will "pop" or click into the float position. The regular movements are in the square pattern - float is like a click up in the middle of the top of the square.

    Can't help with the FEL removal - I'm guessing - the BX24 loader is different enough that I would confuse you!
    For the latest in what's going on around the farm and homestead check out our podcast Chicken Thistle Farm Coopcast, our site Chicken Thistle Farm or join the discussion on Facebook and Twitter!

  3. #3
    Platinum Member
    Join Date
    Apr 2005
    Posts
    773
    Location
    East Ohio
    Tractor
    Kubota L2800HST

    Default Re: FEL float postion. FEL removal.

    Ok. I found the float position.

  4. #4
    Platinum Member Berniep's Avatar
    Join Date
    May 2005
    Posts
    614
    Location
    Greensburg IN
    Tractor
    2005 BX23

    Default Re: FEL float postion. FEL removal.

    I sometimes bump the hydro pedal forward or back(lightly) or raise the loader up and down a little to try and settle it into place.
    Bernie

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2016 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.